Output Regulator Coil (Resident Evil Zero)

Necessary to get the Cable Car moving again.

Category Item
Image of Output Regulator Coil
One of two regulator coils needed to provide power to the cable car control panel.

Use this regulator along with the Input Regulator Coil inside the Machine Room 2F control room. Once both have been set in place and activated the cable car will become available for use.

Location

  • Image of Machine Room 1F - Laboratory B2

    Machine Room 1F - Laboratory B2

    Once you have pulled the switch to move the ladder, it is on the ground next to the doors to the cable car.

    View location Show on map
  • Image of Machine Room 2F - Laboratory B1

    Machine Room 2F - Laboratory B1

    On the ground inside the control room. This is after the cable car power has been restored but subsequently shut off again.

    View location Show on map
  • Image of Machine Room 1F - Laboratory B2

    Machine Room 1F - Laboratory B2

    Once you have pulled the switch to move the ladder, it is on the ground next to the doors to the cable car.

    View location Show on map
  • Image of Machine Room 2F - Laboratory B1

    Machine Room 2F - Laboratory B1

    On the ground inside the control room. This is after the cable car power has been restored but subsequently shut off again.

    View location Show on map
  • Image of Machine Room 1F - Laboratory B2

    Machine Room 1F - Laboratory B2

    Once you have pulled the switch to move the ladder, it is on the ground next to the doors to the cable car.

    View location Show on map
  • Image of Machine Room 2F - Laboratory B1

    Machine Room 2F - Laboratory B1

    On the ground inside the control room. This is after the cable car power has been restored but subsequently shut off again.

    View location Show on map